There’s a reason why you decided to have a swimming pool in your home and it’s important to take proper care and maintenance of your pool so that you can enjoy the benefits. While pool parts such as the motor, grids, filter, and cartridge may require replacement at some time, proper care of your pool will increase its lifespan. It is important to know what needs to be done as far as maintaining your pool is concerned. Here are some of the mistakes that might lead to expensive pool repairs or a green pool.

Allowing pets to play around your pool

If your pool is both human and pet friendly, you don’t have any other option other taking proper care for your pool. It’s always fun spending an afternoon in the pool with your long-haired friend. However, make sure your swimming pool is clean after the pets swim. Net the pool immediately. You may also consider cleaning your filter and skimmer basket a day after to make sure no hair gets back into the pool. Maintaining your pool properly will help prevent the impeller from clogging.

Using a pool dye with the wrong pool filter

Probably you’ve decided to use a pool dye in preparation for the pool party on the next day and everything seems fine. While these dyes can be used in swimming pools they may affect the filter elements of your pool. If you’re planning to add a pool dye, go ahead and replace the grids or cartridge filter with a DE (diatomaceous earth) filter on recirculation before adding it. Allow your pool to continue running as usual without the filter until the pool dye has cleared.

Using algaecide incorrectly

You might want to use algaecide to prevent algae spore from taking over your pool but you need to use it correctly. Algaecides work effectively and can help you get rid of the algae wreaking havoc in your pool. However, they tend to highly reduce the level of chlorine in your pool which means you’ll have to use higher levels of chlorine when applying with algaecide. You must balance its use with other ways of caring for your pool.

Note that low levels of chlorine combined with algaecide in your poll will result in a greener pool. The most important thing you need to do is follow every instructions given by the manufacturer. Do no turn off your pool pump when using algaecide as it needs to reach all the sections of your pool.

Turning your pool pump off

While turning off your pool pump can save on your electricity bill you’re going to spend the amount saved on acid, chlorine, and service maintenance. Your pool is designed in such a way that it keeps itself clean. When allowed to run properly, debris and algae are kept away completely. Running your pool pump also helps to keep your pool blue if you’re living in a high temperature area. Your pool should run 24 hours per day if you’re trying to get rid of algae and turning it to blue. However, you may run the pool pump for about 7 to 8 hours per day during summer. If you are clearing trees from around your pool, be sure to contact The City Arborist Greenville SC.


  1. Thanks for posting this awesome article. I’m a long time reader but I’ve never been compelled to leave a comment.
    I subscribed to your blog and shared this on my Facebook.
    Thanks again for a great post!

Leave a Reply

Your email address will not be published. Required fields are marked *