SUMMER POOL MAINTENANCE TIPS

Maintaining balanced water quality in your pool is very important as it helps you keep your pool clean and prevent it from turning green. Probably you don’t use your swimming pool much and because you’re able to see the bottom, you think everything is okay. Well, your pool might be pretty clear but that doesn’t necessarily mean it is okay. Keeping your pool ready for swimming requires performing regular maintenance and checking the chemicals. Here are some of the tips that can help you keep your swimming pool looking good during summer.

Clean your pool Filter and skimmer baskets

Every time someone takes a dip into your pool, they introduce body oil, dirt, hair, and swimsuit fabric into the water. All these substances get trapped in the skimmer basket or pool filter. The pool filters should be cleaned several times a month in the peak swimming season. However, be careful not to clean it too often as it may become less efficient. When it comes to strainer baskets, you should clean them a couple of times a week to increase the filtration efficiency of your pool and reduce the amount of chlorine to be added. This only needs a few minutes.

Always check the water level

The rate of water loss during the peak swimming season is usually very high. The loss of water is usually through splashing and evaporation as well as simply getting in and out of the swimming pool. That’s why you must keep an eye on the water level and make sure it doesn’t fall below the level of your pool filter.

Maintain the PH level of the water

You must test the pool water to make sure it has the correct PH level (between 7.2 and 7.8). You might do this weekly during the peak swimming season. Use the necessary chemicals to ensure the PH level is balanced.

Get a Pool Cover

Fitting a pool cover can help to keep your pool clean and reduce the water loss through evaporation when the poll is not in use. This is one of the best ways through which you can reduce the amount of care and maintenance on your pool. You won’t have to worry about topping up the amount of water or keep adding extra chemicals.

Skim your Pool Regularly

Skimming is one of the ways to get rid of the debris accumulating on the pool. This should be done every few days using a hand skimmer or a leaf skimmer. Regular skimming is important as it removes large debris such as bugs and leaves. For a pool cleaning quote in Charleston, SC check out Heritage Pools (pool cleaning summerville sc).

Vacuum the pool

Vacuuming should be done every week to keep the pool clear. You may either do it manually or use a vacuum that’s automatic. The later will save much of your time. Don’t forget to clean the vacuum filter.

FIVE COMMON POOL CARE MISTAKES

There’s a reason why you decided to have a swimming pool in your home and it’s important to take proper care and maintenance of your pool so that you can enjoy the benefits. While pool parts such as the motor, grids, filter, and cartridge may require replacement at some time, proper care of your pool will increase its lifespan. It is important to know what needs to be done as far as maintaining your pool is concerned. Here are some of the mistakes that might lead to expensive pool repairs or a green pool.

Allowing pets to play around your pool

If your pool is both human and pet friendly, you don’t have any other option other taking proper care for your pool. It’s always fun spending an afternoon in the pool with your long-haired friend. However, make sure your swimming pool is clean after the pets swim. Net the pool immediately. You may also consider cleaning your filter and skimmer basket a day after to make sure no hair gets back into the pool. Maintaining your pool properly will help prevent the impeller from clogging.

Using a pool dye with the wrong pool filter

Probably you’ve decided to use a pool dye in preparation for the pool party on the next day and everything seems fine. While these dyes can be used in swimming pools they may affect the filter elements of your pool. If you’re planning to add a pool dye, go ahead and replace the grids or cartridge filter with a DE (diatomaceous earth) filter on recirculation before adding it. Allow your pool to continue running as usual without the filter until the pool dye has cleared.

Using algaecide incorrectly

You might want to use algaecide to prevent algae spore from taking over your pool but you need to use it correctly. Algaecides work effectively and can help you get rid of the algae wreaking havoc in your pool. However, they tend to highly reduce the level of chlorine in your pool which means you’ll have to use higher levels of chlorine when applying with algaecide. You must balance its use with other ways of caring for your pool.

Note that low levels of chlorine combined with algaecide in your poll will result in a greener pool. The most important thing you need to do is follow every instructions given by the manufacturer. Do no turn off your pool pump when using algaecide as it needs to reach all the sections of your pool.

Turning your pool pump off

While turning off your pool pump can save on your electricity bill you’re going to spend the amount saved on acid, chlorine, and service maintenance. Your pool is designed in such a way that it keeps itself clean. When allowed to run properly, debris and algae are kept away completely. Running your pool pump also helps to keep your pool blue if you’re living in a high temperature area. Your pool should run 24 hours per day if you’re trying to get rid of algae and turning it to blue. However, you may run the pool pump for about 7 to 8 hours per day during summer. If you are clearing trees from around your pool, be sure to contact The City Arborist Greenville SC.